Sanyo XC50 - PLC XGA LCD Projector Owner's Manual

Also see for PLC-XC50A: Specification sheet Dimensional drawing

Contents

XGA1For detailed functions of each menu, see “Menu Tree” on pages 70-71.Basic Operation①②③④⑤⑥⑦⑧Main Menu Sub-Menu⑨③ Image selectFor computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),Colorboard and Image 1 - 4 (p.33).For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboardand Image 1- 4 (p.40).④ Image adjustFor computer source, used to adjust computer image [Contrast, Brightness, Color temp , white balance (R/G/B),Sharpness and Gamma] (pp.34-35).For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp , white balance (R/G/B),Sharpness, Gamma, Noise reduction and Progressive] (pp.41-42).② PC adjustSelect Auto PC adj , Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area-H and Display area-V to adjustthe parameters to match with the PC input signal format (pp.30-32).⑤ ScreenFor computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom and Digital zoom +/– ](pp.35-36).For Video source, used to set size of image [Normal, wide and Custom] (p.43).① InputUsed to select an input source from Computer 1, Computer ,Video or S-video. (pp.27-28,37-38).⑥ SoundUsed to adjust the volume or mute the sound (p.24).⑧ InformationDisplay the input source information: Input , H-sync freq , V-sync freq , Screen, Language, Lamp status, Lampcounter, Power management, Key lock, PIN code lock and Remote control (p.58).⑨ GuideThe key operation is displayed.⑦ SettingUsed to set the projector’s operating configurations (pp.44-57).Menu Bar