56This function provides the following options in the coolingfans’ operation when the projector is turned off (p.20).L1 ...... Normal operationL ...... Slower and lower-sound than the normal operation(L1), but it takes more time to cool the projector down.SettingFig.1 Filter replacement iconFilter counterPress the SELECT button to select Timer, and then usethe Point ▲▼ buttons to set the timer. Select from (Off/400H/ 700H/ 1000H) depending on the use environment.Note:• Fig.1, Fig.2, Fig.3 and Fig.4 appear at turningon and selecting input source.• Fig.1, Fig.2, Fig.3 and Fig.4 will not appearwhen the Display function is set to “Off” (p.46),during “Freeze” (p.25), or “No show” (p.26).resetThis function is used to display the cumulative lampoperating time and reset the lamp counter.When the lamp life is left 0 hour, the Lamp replacement icon(Fig.1) will appear on the screen, indicating that the end oflamp life is reached.When replacing the projection lamp, reset lamp counter.See "Resetting the Lamp Counter" on page 65.This icon appears on the screen when the end oflamp life is reached.Fig 1 Lamp replacement iconNote:At turning on, the icon (Fig.1) will appear.Note:The Lamp replacement icon (Fig.1) will not appear whenthe Display function is set to Off (p.46), during “Freeze”(p.25) or “No show” (p.26).Fig.2Fig.3 Last scroll iconFig.4 Filter cartridge replacement iconFilter replacement icon appears on thescreen at a set time.Last scroll icon appears on the screenwhen the filter is down to the last scroll.Filter cartridge replacement icon appearson the screen when the filter scroll iscounted down to 0 scroll.Note:• Do not reset the counter(s) when the filter or the filtercartridge are not replaced.• Timer setting notifies that the filter needs replacement. Toreplace the filter, use the filter control function (p.53).FanLamp counterFilter counterThis function is used to set a frequency for the filter replacement.Use the Point ▲▼ buttons to select Filter counter and thenpress the Point ► or the SELECT button to accese thesubmenu items.Filter counter......Show the total accumulated time of thefilter use timer setting.Timer...................To set a timer, when the projector reachesthe time, the Filter replacement icon (Fig. 1)appears on the screen and the totalaccumulated time turns red, indicatingthat the filter replacement is necessary. Ifthe filter is out of scroll and the projectorreaches a time set in the timer setting, Fig.2 appears on the screen, indicating that thefilter cartridge replacement is necessary.Filter counter reset..When replacing the Filter cartridge, reset theFilter counter and the Scroll counter (p.62).Scrolls remaining...When the filter scroll is counted downto 1, Scroll counter on the screen isshowing “0 scroll(s)” , the last scrollicon (Fig. 3) appears on the screen.When the filter scroll is counted downto 0, the Filter cartridge replacementicon (Fig. 4) appears on the screen andthe WARNING FILTER indicator lightsorange, indicating that the filter cartridgereplacement is necessary.Scroll counter reset..When replacing the Filter cartridge, reset theFilter counter and the Scroll counter (p.62).