Sanyo XC50 - PLC XGA LCD Projector Owner's Manual

Also see for PLC-XC50A: Specification sheet Dimensional drawing

Contents

9Part Names and FunctionsRear Terminal② ③① ④ ⑤⑨ ⑥⑧ ⑦⑨ S-VIDEO INConnect the S-VIDEO output signal from videoequipment to this jack (p.15).⑦ AUDIO INConnect the audio output signal from videoequipment connected to ⑧ or ⑨ to this jack.For a mono audio signal (a single audio jack),connect it to the L (MONO) jack (p.15).⑥ COMPUTER1 COMPONENT/ COMPUTERAUDIO INConnect the audio output (stereo) from acomputer or video equipment connected to ②or ④ to this jack. (pp.14, 16)⑧ VIDEO INConnect the composite video output signal tothis jack (p.15).② COMPUTER IN 1 / COMPONENT INConnect output signal from a computer, RGB scart21-pin video output or component video output tothis terminal (pp.14,16).⑤ AUDIO OUT (VARIABLE)Connect an external audio amplifier to this jack(pp.14-16).This terminal outputs sound from AUDIO INterminal (⑥ or ⑦).③ MONITOR OUTThis terminal can be used to output the incominganalog RGB signal and component signal fromCOMPUTER IN 2 / DVI-I terminal or COMPUTERIN 1/COMPONENT IN terminal to the other monitor(pp.14,16).① CONTROL PORTWhen the projector is controlled by a computer,connect to this jack with serial control cable.④ COMPUTER IN / DVI-IConnect computer output (Digital/Analog DVI-I type)to this terminal (p.14).