Sanyo XC50 - PLC XGA LCD Projector Owner's Manual

Also see for PLC-XC50A: Specification sheet Dimensional drawing

Contents

4Video InputThis projector has the picture screen resize function, which enables you to customize the image size.Screen Menu1Provide the image at the 4:3 normal video aspect ratio.Note:• When no signal is detected, Normal is setautomatically and the Aspect dialog boxdisappears.• The adjustable range for Scale H/V andPosition H/V is limited depending on theinput signal.• wide cannot be operated when 70p,105i or 1080i is selected in the AVSystem Menu (p.39).Provide the image at the 16:9 wide screen ratio.Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Screen andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons select the desired item andthen press the SELECT button.Adjust the screen scale and position manually with thisfunction.Press the Point ► button at Custom and the Custom isdisplayed on the screen, you can use the Point ▲▼ buttonsto choose the item you want to adjust.Scale H/V .......... Adjust the Horizontal/Vertical screenscale.H&V ................... When set to On, the aspect ratio isfixed. The Scale V appears dimmed andbecomes unavailable. Adjust Scale H,then the screen scale is automaticallymodified based on the aspect ratio.Position H/V ..... Adjust the Horizontal/Vertical screenposition.Common ........... Save the adjusted scale or position to allthe inputs. Press the SELECT button atCommon to display a confirmation box.To save the scale or position, press theSELECT button at yes. When Customis selected, the saved scale or position isused.Reset ................. Reset the all adjusted values. Pressthe SELECT button at Reset to displaya confirmation box. To reset, press theSELECT button at yes.NormalwideCustomScreen Size Adjustment