5Computer InputThis projector has the picture screen resize function, whichenables you to customize the image size.Screen MenuProvide the image to fit the screen size.Provide the image in its original size. When the originalimage size is larger or smaller than the screen size(1024 x 768), the projector enters to the panning modeautomatically. Use the Point ▲▼◄►buttons to pan theimage. When adjusted, the arrows will turn red. Whenreached to the correction limits, the arrows will disappear.Provide the full screen image.Note:• The Screen Menu, except for Normal and Custom, cannot be operated when 70p(HDTV), 105i (HDTV),or 1080i (HDTV) is selected in the PC System Menu (p.29).• This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution ishigher than it, reset the resolution to the lower before connecting to the projector.• The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.• True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PCSystem Menu (p.29).1To store the adjusted data, select Store and press the Point►or the SELECT button. Use the Point ▲▼ buttons toselect one from Image 1 to 4 and press the SELECT button.A confirmation box appears and then select yes. Storeddata can be called up by selecting an Image (1–4) in theImage Mode Selection on page 33.Provide the image to fit the wide video aspect ratio (16:9) byexpanding the image width uniformly. This function can beused for providing a squeezed video signal at 16:9.Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Screen andthen press the Point ►or the SELECT button.Use the Point ▲▼buttons select the desired item andthen press the SELECT button .A confirmation box appears andthen select yes.StoreNormalTruewideFullScreen Size Adjustment