Sanyo XC50 - PLC XGA LCD Projector Owner's Manual

Also see for PLC-XC50A: Specification sheet Dimensional drawing

Contents

7Check the indicators for projector condition.The projector is operating normallyThe projector is off. (The AC power cord is unplugged.)The projector is in stand-by mode. Press the POWERON/STAND-BY button to turn on the projector.Projector ConditionPOWERred/greenIndicatorsLAMPREPLACEyellowWARNINGTEMP.redThe filter is scrolled using the Filter control function in thesetting menu.When the filter is being scrolled, the Filter replacementicon and “Please wait...” message (Fig. 1) appear on thescreen for about 30 seconds.The projector is in the Power management mode.The projector is operating normally.WARNINGFILTERorangeFig.1 Filter replacement icon and “Please wait...” • • • off • • • blinking slow(approx. 2 seconds ON, 2 seconds OFF)• • • blinking fast(approx. 0.5 seconds ON, 0.5 seconds OFF)• • • red The temperature inside the projector is elevated close tothe abnormally high level.The temperature inside the projector is abnormally high.The projector cannot be turned on. When the projectoris cooled down enough and the temperature returns tonormal, the POWER indicator lights red and the projectorcan be turned on. (The WARNING TEMP. indicator keepsblinking.) Check and replace the filter.Projector ConditionPOWERred/greenIndicatorsLAMPREPLACEyellowWARNINGFILTERorange  The projector is detecting abnormal condition• • • green / orange / yellowblinking fast greenblinking fast redgreengreengreenWARNINGTEMP.redblinking fast redblinking fast red  The projector is preparing for stand-by or the projectionlamp is being cooling down. The projector cannot beturned on until cooling is completed.AppendixIndicators and Projector Condition