36 Part C: Basic Tasks MB8100-00-00-806 © TEL 20035. If your PC has more than one modem, select the one you want to use in theConnect using box. Normally, you do not need to click Configure andconfigure the PC’s port to the modem. The default settings can be left asthey are.6. In the Phone number box, enter the telephone number of the line to theBSS’s dial-up modem.7. If the Service Kit needs to use the country code and the area code to accessthe BSS, provide this information as follows.a. In the Area code box, enter the BSS’s area code.b. In the Country code box, select the BSS’s country code.c. Select the Use country code and area code check box.8. Set polling intervals that are appropriate to the speed of your connection.The Alarms and Monitoring boxes specify the interval from one ServiceKit poll of the base station to another.9. Click OK. The new connection now appears in the Connections dialogbox.Adding an Over-the-Air ConnectionFor each BSS that is fitted with a radio modem, you need to define aconnection.1. Select Tools > Configure Connections. The Connections dialog boxappears.2. Click New. The New Connection dialog box appears.3. In the Name box, enter a suitable name. The name should specify the BSSand the connection type4. In the Connection type box, select Over the Air.The New Connection dialog box now looks like this:
