TB8100 Service Kit User’s Manual Viewing System Data 69VSWR The highest, the average, and the minimum voltage standing wave ratioreadings are shown. The base station reads the VSWR once in everytransmission.RSSI The highest, the average, and the minimum RSSI readings are shown in dBm.The base station reads the RSSI once each time the base station receives a validsignal.Watchdog resets The total number of times that the watchdog circuit reset the reciter becausethe reciter firmware locked up.Task ManagerresetsThe total number of times that Task Manager reset the base station.Service Kit resets The total number of times that Service Kit users reset the base station.Power Amplifier DataThe Power Amplifier area (Monitor > Data Logging > System Data) displaysthe following data.Temperature The Power Amplifier area displays maximum, average, and minimumtemperatures. The maximum temperature is the highest maximum temperaturerecorded by any of the three PA temperature sensors. These temperatures areread hourly.Air intaketemperatureThe Power Amplifier area displays maximum, average, and minimum air intaketemperatures. The air intake temperature is read hourly.PA fan operatingtimeThe number of hours that the PA fan has been operating.Power Management Unit DataThe Power Management Unit area (Monitor > Data Logging > System Data)displays the following data.Battery voltage The area displays maximum, average, and minimum battery voltages. Thebattery voltage is read hourly whether or not the PMU is using the battery asits power supply.PMU fanoperating time The number of hours that the PMU fan has been operating.
