124Chapter 4 Test Menu• Poweron Pages. The number of 11 inch pages that have been printedsince the current power on of the printer.Auto Dump• Disable (factory default).• Enable. When a printer receives a ‘E03x’ message type on the controlpanel, a dump file will be automatically created and stored in flash as file“autodbg1.dbg” or “autodbg2.dbg” in the printer file system. This file canbe uploaded to the host using the PrintNet Enterprise Suite application.Upon receipt of this file, it should be sent to Printronix Customer Supportfor review and evaluation.Fault Override SubmenuThis submenu deals with the configuration of fault information from theengine.Paper MotionThis parameter controls paper motion fault reporting status. This setting issaved in NVRAM so that it does not need to be set up on powerup each time.Shuttle OffThe amount of time the shuttle continues moving after no data is received.If your host is slow, setting the number to a higher value will prevent theprinter from spending time shuttling up and down between data bursts.Diag SubmenuThis submenu deals with the configuration of panel functionality defaults.Panel LockThis parameter controls whether the Enter key is locked or unlocked atpower-up.• Off (default). The panel is unlocked upon power-up.• On. The panel is locked upon power-up.Panel DisplayThis parameter controls the information displayed on the second line of thecontrol panel display.• Configuration (default). The active configuration name displays on thesecond display line.• IP Address. The IP Address displays on bottom line of the LCD.• Ribbon Life. The Ribbon Life indicator displays on the bottom line of theLCD.
