User guide Specifications113Paper specificationsContinuous paper tractor 1,single part formsWeightWidth 1Form length60 to 120 g/m 276 to 420 mm76 to 559 mmContinuous paperMulti-part forms, tractor 1(to be tested individually)CopiesWeight of originalWeight of copiesWeight of bottom sheetThickness (max.)Width 1Form length1 + 645 to 65 g/m 245 to 56 g/m 245 to 65 g/m 20.6 mm76 to 420 mm76 to 451 mmCut sheet insertion via frontfeed/manual single part formsWeightWidth 1Form length80 to 120 g/m 276 to 420 mm76 to 305 mmEnvelopes WidthLengthThickness76 to 420 mm76 to 305 mm0.32 mmSet of forms Sets of forms may be used only if the top edgeis bound. The binding edge should be as softas possible. A wavy binding edge may amperthe smooth feeding of these sets. Multi-partforms must be loaded with the bound top edgedown. Multi-part forms should be tested forsuitability.Paper quality Light pulp paper of medium fine quality, paperbearing the quality mark SM Post and photo-copy paper are suitable for use. Unsuitable are:satin-finisch or coated papers, imitation artpapers, and embossed papers. Since paper asnatural material reacts strongly to environmen-tal influences (e.g. humidity, temperature), theplace of storage should be selected carefully.We recommend that this kind of paper shouldbe tested extensively before larger quantitiesare acquired.Should papers with a dark reverse side beused, these should also be tested for theirfunctionality. Please pay attention to the use ofinfrared reflecting colors, when acquiring thesepapers.1 with PMS = Off, if PMS = On: 6.3" (160 mm)
