User guide The Menu74Setting the bottom margin(Botmrg)The bottom margin option gives you the possibility to set the bottommargin with the number of the line (numbered from the top paperedge) where the printing actually stops for a given page.Press the Botmrg key (2).Setting options: Line 1 to FormlengthDefault setting: FormlengthThe setting of this Option depends on the setting of both thevertical pitch and the form length options. For details refer toSetting line spacing (LPI) (page 48) and Form length (Forml)(page 92). The Values range from the value for top margin (seeSetting the top margin (Topmrg) on page 73) to the value for formlength.Do not set Topmrg eqal or higher than Botmrg.Confirm the setting by pressing the Set (1) key. Change to the nextparameter with the Next key (4).Setting the left margin (Leftmrg) The left margin option is defined by the number of the columns(numbered from the left paper edge) where the printing actuallystarts.Press the Leftmrg key (2).Setting options: 0 to 30/10"Default setting: 0/10"Confirm the setting by pressing the Set (1) key. Change to the nextparameter group with the Next key (4).Topmrg BotmrgOnlineSetupBack Next21 3 4Botmrg= 70 *OnlineSetupSet < > Exit21 3 4STOPLeftmrgOnlineSetupBack Next21 3 4Leftmrg= 0 */10 " OnlineSetupSet < > Exit21 3 4
