User guide The Menu41Menu handling You can navigate in the current menu using the four function and se-lection keys arranged below the LC display field. Each function andparameter displayed in the LCD is executed or selected by the cor-responding key below, respectively. Usually two parameter groupsare combined at one level. In the following example, these are theLPI and Skip parameter groups.If you do not wish to change one of the two parameters you can ei-ther press the Next key (to access the two following parametergroups in the menu), or you can press the Back key (to access thetwo previous parameter groups in the menu).If you want to change a setting, (e.g. the line density), then press theLPI key (LPI = lines per inch) to access the actual parameter level.The currently valid setting is marked by a * (in the example belowthe current setting is 6 lpi). With the < and > keys you can view theother parameters available for this setting.Example:Save settings Once the desired parameter is displayed on the LC display, you cansave it by pressing the Set key. The parameter is then set and theprinter automatically displays the parameter groups again. With theExit key you can leave the sublevel without saving your changes.LPI SkipBack Next6 LPI *Set < > ExitSkip = 0.0 Inch *Set < > Exitback to the previousparameter groups on to the nextparameter groups
