User guide The Menu45Menu parameters The following section introduces and explains all the possible menusettings.Press Setup key.Press Menu (1) key.Setup mode and Menu mode may be disabled. Holddown the Setup key while switching on the printer toenable menu mode. If you want to enable access to thismode permanently, you need to change the appropriatesetting in the macro; see Menu lock (MenLock) (page 56).Printing out macroconfigurations (Print)Prints the menu configurations using the active paper feed; seeMenu settings (example) (page 88).Press Print (2) key, to start the printout.Loading menuconfigurations (Macro)A menu is loaded, you can choose between four menus; see Menuhandling (page 41).Press Macro (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: Load Macro=1/2/3/4Default Setting: Load Macro=1Confirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Ready Front1M1 EPS OnlineSetup21 3 4Adjust PaprpathMenu Char OnlineSetupPrint MacroOnlineSetupBack Next21 3 4Print MacroOnlineSetupBack Next21 3 4Load Macro=1 *OnlineSetupSet < > Exit21 3 4
