Tascam DM-3200 Release Notes

Also see for DM-3200: Quick reference Owner's manual Manual Software guide Application guide

Contents

DM-3200 Release NotesTASCAM DM-3200 Release Notes 132 Use the CURSOR key to select the encoder modekey to assign a parameter from the list in the EDITTARGET SELECT section.Starting at the top, row numbers 1-4 represent the numbersof the encoder mode keys.“NONE” means that the encoder key is pressed by itself,“SHIFT+” means that the encoder key and the SHIFT keyare pressed simultaneously, and “CTRL+” means that theencoder key is pressed together with the CTRL key.For example, if you want to assign a parameter to “thetopmost encoder mode key when it is pressed with the SHIFTkey,” select the field where row “1” and “SHIFT+” cross.The encoder mode which is currently assigned to theselected encoder mode key will be highlighted in theENCODER MODE SELECT section at the bottom of the screen.3 Using the JOG/DATA dial, select the encoder modeto be assigned to the highlighted encoder mode key,from the ENCODER MODE SELECT section.NOTEDepending on whether the surround mode is set toSTEREO or not, the options given in the ENCODERMODE SELECT section differ.4 Press the ENTER key.Assignment of the parameter is now complete andwill be displayed in the EDIT TARGET SELECT section.NOTEYou need to perform the corresponding encodermode key operation in order to assign the set param-eter to a rotary encoder.ª Cascade connectionDM-3200 V1.20 allows you to make a cascade connectionbetween two DM-3200 units.Cascade connection overviewTwo DM-3200 units that are connected by a cascadeconnection can be operated as though they are one mixer.STEREO• buss, BUSS 1-16, AUX buss 1-8, and SOLO busscan be shared when the sharing function is set to ON inthe CASCADE screen.The audio clock is shared by the two units.• Timecode is shared to synchronize the two units.• Various settings and operations can be interlocked• between the two units. Please refer to the “Settings andOperations that can be interlocked” section on page 9 ofthis supplement.Master/slave settingYou need to set one DM-3200 to be the cascade master andthe other to be the cascade slave. Any set-up that affectsthe operation of the system as a whole will be performedon the cascade master.An audio clock source is selected from the clocks fed to• the cascade master. You cannot select the audio clocksource on the cascade slave.Timecode fed to the cascade slave cannot be used as the• synchronization source.The cascade connection can be turned• ON and OFF onlyon the cascade master.When the cascade connection is• ON, the parameterset-ups on the cascade master (parameters to be inter-locked) are reflected on the cascade slave.ª Making a cascade connectionThis section explains how to make a cascade connectionbetween two DM-3200s that are running Version 1.20.1 Using the TASCAM cascade cable (PW-1000CS –sold separately), connect the CASCADE ports of thetwo DM-3200.WARNINGOnly use the special TASCAM cascade cable. Use ofany other type of cable may result in damage to theequipment.2 Set one of the DM-3200 units to be the cascademaster, and the other the cascade slave.To set the master and slave, display the DIGITAL screen usingthe DIGITAL key in the SCREEN MODE/NUMERIC ENTRYsection, and use the POD 3 key (or continue pressing theDIGITAL key) to display the CASCADE sub-screen. Set the IDof one of the units to MASTER, and the other to SLAVE.Figure 13: DIGITAL>CASCADE screenNOTESet the unit ID while the ON/OFF set-up is OFF. Youcannot change the ID set-up while it is ON.3 Turn the ON/OFF setting on the CASCADE sub-screen of the cascade master to ON.Move the cursor to the ON/OFF button and press theENTER key. A confirmation screen will come up. Checkthe setting and press the ENTER key again to confirm.NOTEON/OFF status cannot be changed while the timecodeis running.