Tascam DM-3200 Release Notes

Also see for DM-3200: Quick reference Owner's manual Manual Software guide Application guide

Contents

DM-3200 Release Notes4 TASCAM DM-3200 Release NotesMUTE Key FunctionYou can select whether the MUTE keys will be used ascontrollers for the mixer parameter MUTE or as MIDIevent trigger keys. If they are used as MIDI event triggers,MIDI control change messages will be transmitted.If you want to use the MUTE keys as MIDI event triggerkeys, move the cursor to the MUTE KEY Function sectionMIDI Event Trigger radio button, and press the ENTERkey to make your selection.MIDI control messages used as MIDI Event Triggers•In the MIDI>CtrlChg EXT screen you can specify the controlchange messages that will be used when using the MUTEkeys as MIDI event trigger keys..Figure 2: MIDI>CtrlChg EXT screenYou can also jump to this screen by moving the cursor tothe SETUP button in the MUTE key Function section andpressing the ENTER key.When the MUTE key is pressed, the control change messagedata byte 127 (7Fh) is output, and 0 (0h) when released.MIDI>SETUP screen filtering•In conjunction with support for MIDI event triggering,a C.Chg EXT filter has been added to the USB MIDI 4:PC/CC port.Figure 3 MIDI>SETUP screenMeter displayThe meter display of the User Defined Layer is also shownin the User Defined Layer screen, but can be shown in theMETER/FADER>METER screen as well.Figure 4METER/FADER>METER screenWhen you use POD1 to move the cursor to the REMOTEbutton, and the User Defined Layer meters will appear.Display in the meter bridge•The User Defined Layer meter display can also be shownin the separately sold MU-1000 meter unit option.The MU-1000’s metering point section does not have aREMOTE point.When all LEDs in the METER LAYER section are dark, theREMOTE layer meters are shown.Please select the Remote Layer Meter in the METER/FADER-> METER screen. Also if you check the check box for “SELkey Follows Fader Layer Status” and “Meter Follows SELkey” on the OPTION -> PREFERENCE screen, the meter bridgewill follow when you change to the REMOTE Fader Layer.TASCAM FX2.0 supportªThe TASCAM FX2.0 provided on the DM-4800 can nowbe used on the DM-3200 as well.The TASCAM FX2.0 multi-effects provide chorus,flanger, de-esser, delay, distortion, compressor, phaser, andpitch shifter, and numerous presets are provided.