Tascam DM-3200 Release Notes

Also see for DM-3200: Quick reference Owner's manual Manual Software guide Application guide

Contents

DM-3200 Release NotesTASCAM DM-3200 Release Notes 9FireWire card support By installing an IF-FW/DMFireWire interface card (sold separately), it is now possible totransfer audio data between your computer and a DM-3200.An IF-FW/DM card can only be installed into Slot 1.Surround monitor card support Integrated surroundmonitoring can be added to the DM-3200 by installing anIF-SM/DM surround monitor card (sold separately), AnIF-FW/DM card can be installed into either Slot 1 or Slot 2.Naming the mixer DM-3200 V1.20 allows you to setand edit mixer names.Remote operation through MMC Now you canremotely operate external transports from a DM-3200 usingthe MMC (MIDI Machine Control) protocol.MIDI control External MIDI devices can be controlledfrom the DM-3200 using MIDI Control Change andProgram Change Messages using the new external con-trollers: MIDI fader, MIDI controller, and MIDI mixer.Assigning parameters to rotary encodersDM-3200 now allows you to assign which parameters arecontrolled from the rotary encoders.Cascade connection A cascade connection can bemade between two DM-3200 units.GPI functionality DM-3200 can now remotely controlexternal devices using a GPI signal output.Expanded dynamic automation function Thedynamic automation function of the DM-3200 can nowcapture buss assignments, effect parameters, and imageparameters.ª FireWire card supportBy installing an IF-FW/DM FireWire interface card (soldseparately) into Slot 1 of the DM-3200 V1.20, you can trans-fer audio data between your computer and the DM-3200. AnIF-FW/DM inserted into Slot 2 will not function.Figure 1 is an example of the panel display when anIF-FW/DM card is installed in Slot 1.For more details, please refer to the IF-FW/DM documentation.ª Surround monitor card supportBy installing an IF-SM/DM surround monitor card (soldseparately), you can add integrated surround monitoring tothe DM-3200.Figure 1 shows an example of the screen display whenIF-SM/DM card is inserted in Slot 2.For more details, please refer to the owner’s manual thatcomes with the IF-SM/DM card.Figure 1: SLOT screen when an IF-FW/DM and anIF-SM/DMare installedª Naming the mixerDM-3200 V1.20 allows you to set and edit mixer names sothat you can easily differentiate between multiple mixerswith the TASCAM Mixer Companion computer applica-tion.1 On the UTILITY SYSTEM screen, move the cursor tothe EDIT button in the MIXER NAME section. Press theENTER key.Figure 2: UTILITY>SYSTEM screenA pop-up window will appear for editing the mixername.Figure 3: Name edit pop-up screenVersion 1.20