Tascam DM-3200 Release Notes

Also see for DM-3200: Quick reference Owner's manual Manual Software guide Application guide

Contents

DM-3200 Release NotesTASCAM DM-3200 Release Notes 5For details on each type and on the preset library, refer tothe separate EFFECT LIST, which are provided as elec-tronic publications in PDF format.This can also be downloaded from the TASCAM websitehttp://www.tascam.comTASCAM FX2.0 recallTASCAM FX2.0 recall is performed in theLIBRARY>EFFECT screen shown in the right column.Figure 5 LIBRARY>EFFECT1 screenPresets for the various TASCAM FX 2.0 effects are provid-ed in preset bank 3 of the effect library.The settings from this preset bank 3 are recalled into thetwo effect DSP units of the DM3200 for use.Both of the two units can use TASCAM FX 2.0 effectssimultaneously.TASCAM FX Compressor GR meter indi-ªcationA gain reduction meter has been added for the establishedTASCAM FX effects. This meter is displayed in theeffects screen when the Guitar Compresser and compress-er is loaded.Figure 6 Example screen for Logic controlWhen the separately sold IF-FW/DM MKII option card isinstalled, you can now transfer up to 32 channels of I/O (at44.1kHz/48kHz/88.2kHz/96kHz) between your computerand the DM-3200.For details on the IF-FW MKII, refer to the IF-FW MKIIoperating manual.DAW control screen display of channelsª1-16In each DAW control screen, you can now view all sixteenchannels in a single screen.The following illustration is an example screen for Logiccontrol.Figure 5 Example screen for Logic controlª Windows VistaThis version of the DM-3200 is now fully supported byWindows Vista 32 bit and Vista 64 bit.It is possible to do remote control of DAW Applicationsthat run under Windows Vista and transfer MIDI messagesbetween the DAW software and the mixer.