12 TASCAM DR-1002–Quick Start GuidePlay and stop playbackFollow these steps to listen to a recording usingthe built-in speaker or headphones.1 Prepare the built-in speaker or headphones.If you want to listen using the built-in speaker,set the SPEAKER switch to ON.To listen with headphones, connect them to theheadphones connector.HeadphonesNOTEWhen headphones are connected, sound will not beoutput from the speaker even if the SPEAKER switchis ON.2 Press the PLAY/PAUSE [Á/π] key to startplayback.3 Adjust the volume with the /SP OUTPUT control.4 Press the STOP [ª] key to stop playback.For detailed information about playback andconvenient playback functions, see “7–Playback”on page 33.Turn the power offPress and hold the POWER to turn the power off.CAUTIONAlways use the power key to turn the unit power OFF.When the power is ON, do not remove the battery orbatteries set as the MAIN battery or disconnect thePS-P520 adapter (sold separately) if no batteries areinstalled. Doing so will cause all recordings, settingsand other data to be lost.
