TASCAM DR-100 4710–Settings and InformationPB CONTROLVSA Set VSA (OFF, ON)SPEED Set the speed (-50–+16%, default 32)Menu item Display/Setting Settings or explanationPB CONTROL screen (press and hold the PB CONTROL key)AUTO RECMODE Set the operation mode (MARK, PAUSE, TRK INC)START LEVEL Set the level that the unit recognizes as input to record(OFF, -6dB, -12dB, -24dB, -48dB)END LEVEL Set the level below which the unit determines that there is no signal to record (OFF,-6dB, -12dB, -24dB, -48dB)END DELAY Set the time that the unit waits to stop recording after it determines that there is nosignal to record (1sec, 2sec, 3sec, 4sec, 5sec)Menu item Display/Setting Settings or explanationAUTO REC screen (press the AUTO key)List of popup menu itemsIn addition to regular menus, there are popup menus that appear on other screens.Folder operationsSELECT Set a folder as the active folderCREATE Create a new folderALL DEL Erase all the files in the folder (folders are not erased)CANCEL Close the popup menuOverview Display/Setting ExplanationBROWSE screen (select a folder and press the ENTER/MARK key)File operationsPLAY Select a file and play it (and return to the Home Screen)INFO Show file informationADD LIST Add a file to the playlistDELETE Erase a fileOverview Display/Setting ExplanationBROWSE screen (select a folder and press the ENTER/MARK key)CANCEL Close the popup menuEdit the PLAYLISTPLAY Play the selected fileALL CLR Remove all files from the playlistDELETE Remove the selected file from the playlist (file is not erased from the card)MOVE Change the position of the track in the playlistOverview Display/Setting ExplanationPLAYLIST screen (select a file and press the ENTER/MARK key)CANCEL Close the popup menuOVERDUBOFF Do not overdubON Record an overdubMenu Display/Setting ExplanationHome Screen (press the RECORD key when MONITOR is ON)QUICKTAG Add a tag to the file nameDEL Delete the fileMenu Display/Setting ExplanationHome Screen (press the QUICK key)