TASCAM DR-100 235–Screens and Operation BasicsRecording screenThis screen appears when in recording standbyand during recording.1 Input function setting statusTYPEStereoMono(See “Setting mono input (TYPE)” on page 41.)LOW CUTOFFON(See “Using the low cut filter (LOW CUT)” onpage 41.)LEVEL CTRL/ Auto gain control/ Limiter(See “Using the auto gain control and limiter(LEVEL CTRL)” on page 42.)2 Prerecording function status“PRE” appears when the prerecording function isON.3 Recorder operationª Standbyπ Pausedº Recording4 Recording level metersWhen overdubbing is off, the input signal level isshown.When over dubbing is on, the combined input andplayback signals are shown.5 File nameThe file name that will automatically be given torecorded files is shown.6 Input signalThe input signal is shown.7 Elapsed time/remaining time(hours: minutes: seconds)Shows the amount of time that can be recordedwhen in standby.Press the HOME key to toggle between display ofelapsed and remaining time. A “–“ appears at thestart of the remaining time.8 Peak value in decibels (dB)Peak recording level values are shown digitally.9 Recording mode/sampling frequencyShows the recording file format and samplingfrequency.Using menusUse the MENU screen to make various settings.1 Press the MENU key to open the MENU screen.2 Use the wheel to select a menu (selected items arehighlighted and appear as light letters on a darkbackground), and press the ENTER/MARK key toopen a setting screen.Example: REC SETTING screen3 Use the wheel to select (highlight) a setting item,and press the ≤ key (or the ENTER/MARK key)to select the value of the setting.Example: setting the sampling frequency4 Use the wheel to change the setting.5 Complete the change.To set a different item in the same menu, pressthe μ key to select the item you want to set.To open the MENU screen, press the MENU key.To return to the Home Screen, press theHOME key.