Tascam DR-100 Owner's Manual

Also see for DR-100 MKIII: Guide to using Comparison chart Owner's manual Service manual Owner's manual

Contents

Tascam DR-100 Owner's Manual Manual pdf 46 page image

46 TASCAM DR-10010–Settings and InformationMenu item listThis list provides an overview of the various menu items and their settings that appear on the unitdisplay. The items shown in bold are default setting values.MENU screen (press the MENU key)Menu item Display/Setting Settings or explanationINFORMATIONFILE (1/4) Information about the fileBROWSECARD (2/4) Information about the SD cardPLAYLISTSYSTEM (3/4) Information about the systemPLAY MODESD card file operationsINPUT SETTINGPlaylist editingREC SETTINGAREA Set the area for inclusion in repeat playback (ALL FILES, FOLDER, PLAYLIST)DIVIDEREPEAT Set the repeat playback mode (OFF, SINGLE, 1 REPEAT, ALL REPEAT)SETUPMONITOR Set input monitoring (OFF, ON)BATTERYTYPE Set the input type for the UNI MIC, OMNI MIC, XLR MIC IN (STEREO, MONO)LOW CUT Set the low cut filter (OFF, 40Hz, 80Hz, 120Hz)LEVEL CTRL Set the input level control function (AUTO, LMT)FORMATSet the audio file format(WAV 16bit, WAV 24bit, MP3 32kbps, MP3 64kbps, MP3 96kbps, MP3 128kbps,MP3 192kbps, MP3 256kbps, MP3 320kbps)SAMPLE Set the sampling frequency rate (44.1kHz, 48kHz)SIZE Set the maximum file size (64M, 128M, 256M, 512M, 1G, 2G)PRE REC Set the PRE REC function (OFF, ON)DELAY Set the REC DELAY function (OFF, ON)LEVEL Playback level (0–20)CUE/REV SPEED Set the fast rewind and fast forward speed (x2, x4, x8, x10)AUTO OFF Set the time before automatic shutdown when running on batteries(OFF, 3min, 5min,10min, 30min)BACKLIGHT Set the time before the backlight turns off (OFF, 5sec, 10sec, 15sec, 30sec)CONTRAST Set the LCD contrast (0–20, default is 8)DIMMER Set the backlight brightness (OFF, LOW, HIGH)INITIALIZE Restore the default settingsQUICK FORMAT Quick Format the SD cardFULL FORMAT Full Format the SD cardMAIN Set the main battery (Li-Ion, AA)BATTERY (4/4) Information about the batteriesMIX BALANCEDivide a fileFILE NAMETYPEWORDSet the type of automatic file name (WORD, DATE)Set the characters used when TYPE is set to WORD (DR-100)AA TYPE Set the AA battery type (ALKALI, Ni-MH)DATE/TIME