Tascam DR-100 Owner's Manual

Also see for DR-100 MKIII: Guide to using Comparison chart Owner's manual Service manual Owner's manual

Contents

Tascam DR-100 Owner's Manual Manual pdf 30 page image

30 TASCAM DR-1006–RecordingAutomatically pausing recording (PAUSE)You can set the unit to automatically pause afterthe input level of the recording becomes lessthan the END LEVEL setting and the END DELAY timepasses.1 Press the AUTO key to open the AUTO REC screen.2 Set the MODE item to PAUSE.3 Set the value of the END LEVEL item.4 Set the value of the END DELAY item.5 Press the HOME key to return to the HomeScreen.6 Press the RECORD (º) key while holding downthe AUTO key to put the unit into recordingstandby.Recording starts automatically when the inputsignal exceeds the START LEVEL value.NOTEPress the STOP (ª) key to stop automatic recording.Start new files automatically duringrecording (TRK INC)A new file can be created automatically duringrecording when, after once becoming less than theend level, the input signal exceeds the start levelagain.1 Press the AUTO key to open the AUTO REC screen.2 Set the MODE item to TRK INC.3 Set the value of the END LEVEL item.4 Set the value of the START LEVEL item.5 Press the HOME key to return to the HomeScreen.6 Press the RECORD (º) key while holding downthe AUTO key to put the unit into recordingstandby.Recording starts automatically when the inputsignal exceeds the START LEVEL value.NOTEPress the STOP (• ª) key to stop automatic recording.You can also create new files manually.• (See“Dividing a recorded file manually (DIVIDE)” onpage 28.)When new files are created, incremental numbers•are added to the end of each file name.CAUTIONA new file cannot be created if the total number of•files and folders would exceed 999.Files shorter than two seconds cannot be created.•If the name of a new created file would be the•same as that of an existing file, the number will beincremented until the new file has a unique name.Mark functionAdding marks manually to a recordingYou can manually add marks to a recording whereyou want them.Press the ENTER/MARK key while recording toadd a mark.NOTEA mark is automatically added when you restart•recording after temporarily pausing.Mark information is stored in the file with•numbers between 01–99. The maximum numberof marks in a file is 99.Moving to a mark positionYou can move to marks in the currently selectedfile when paused and during playback.You can use this function to identify points tocreate shortcuts to the beginning of songs, forexample.Press the Â/¯ keys while pressing andholding the ENTER/MARK key during playback orwhen stopped.NOTEYou cannot move to a mark in a different file.