Tascam DR-100 Owner's Manual

Also see for DR-100 MKIII: Guide to using Comparison chart Owner's manual Service manual Owner's manual

Contents

Tascam DR-100 Owner's Manual Manual pdf 48 page image

48 TASCAM DR-10011–MessagesThe following is a list of the popup messages that might appear on the DR-100 under certain conditions.Refer to this list if one of these popup messages appears and you want to check the meaning ordetermine a proper response.Message Meaning and responseFile Name ERRThe DIVIDE function would cause the file name to exceed 200 characters. The DIVIDE functionadds "_a" or "_b" to the end of the file name. Before choosing the DIVIDE function, connect theunit to a computer and edit the file name to less than 198 characters.File Not FoundThe DIVIDE function would cause the file name to be the same as that of an existing file. TheDIVIDE function adds "_a" or "_b" to the end of the file name. Before choosing the DIVIDEfunction, connect the unit to a computer and edit the file name.Non-SupportedBattery EmptyThe file added to the playlist cannot be found or a file could be damaged. Please check the file inquestion.I/O Too ShortThe audio file is not a supported format. Please see "8–Connecting with a Computer" for fileformats that this unit can use.The battery is almost out of power. Recharge the lithium-ion battery and/or replace the AAbatteries.File Not FoundPLAYLISTThe IN and OUT points are too close together. Reset the IN and OUT points with at least 1 secondbetween them.No PLAYLISTThe file in the Playlist cannot be found. Please confirm that the file is still in the Music Folder.PLAYLIST FullNo files have been added to the Playlist. Add a file to the Playlist or change the play mode tosomething besides PLAYLIST.The playlist is full. You cannot add more than 99 tracks to the Playlist.The card is not formatted properly or the formatting is broken. Change the card or press theENTER/MARK key when this message appears to format the card in FAT format.CAUTION Execution of FAT formatting erases all data currently on the card.Dup File NameMBR Error Init CARDThe FAT formatting of the card is abnormal or broken. This message also appears if you FATformatted the card using a computer connected by USB and if a new card is inserted in the unit.Always use the DR-100 to conduct FAT formatting of cards to be used with it. Change the card orpress the ENTER/MARK key when this message appears to format the card in FAT format.CAUTION Execution of FAT formatting erases all data currently on the card.Format ErrorFormat CARDFile Not FoundMake Sys FileThe system file is missing. This unit requires a system file for operation. When this messageappears, press ENTER/MARK to automatically create a system file.Invalid SysFileMake Sys FileInvalid CardChange CardThe system file required to operate this unit is invalid. When this message appears, press ENTER/MARK to automatically create a system file.Protected CardChange CardSomething might be wrong with the card. Change the card.Write TimeoutThis appears when the card is protected and lacks the necessary Music Folder and other foldersand files. Unlock the write protect switch, restart the power and format the card.Writing to the card timed out.Backup files on the card to your computer, and format the card.