TASCAM DR-100 378–Connecting with a ComputerBy connecting this unit with a computer using theUSB cable, you can transfer audio files on the SDcard in the unit to a computer, as well as transferaudio files on the computer to the SD card in theunit.This unit can handle audio files of the followingformats (only stereo files).MP3: 32–320 kbps, 44.1/48 kHzWAV: 44.1/48 kHz, 16/24 bitComputerUSBCAUTIONYou cannot use this unit’s other functions when it isconnected to a computer by USB.When connected, "connected... USB" appears onthe screen of the recorder.If an SD card is not properly inserted beforemaking the USB connection, "Can't Save Data"appears on the screen.This unit appears on the computer screen asexternal volume named "DR-100."Connecting a computerConfirm that an SD card is properly insertedinto the unit, and use the included USB cable toconnect this unit with a computer.Transferring files to a computer1 Click the "DR-100" drive on the computerscreen to show the "MUSIC" and "UTILITY"folders.2 Open the "MUSIC" folder and drag anddrop the files that you want to transfer to thecomputer to destinations of your choice.Transferring files from a computer1 Click the "DR-100" drive on the computerscreen to show the "MUSIC" and "UTILITY"folders.2 Drag and drop files on the computer that youwant to transfer to the unit to the "MUSIC"folder.TIPYou can manage the MUSIC folder from the•computer.You can create subfolders in the MUSIC folder•up to the second level for use with this unit. TheDR-100 cannot recognize subfolders and audio fileson the third level or below.The MUSIC and UTILITY folders are in the"DR-100" drive.Disconnecting from a computerBefore disconnecting the USB cable, use theproper procedures for your computer to unmountthe "DR-100" (as an external drive). The recorderwill automatically restart.See the computer’s operation manual forinstructions about how to unmount an externaldrive.