Tascam US-428 Owner's Manual

Also see for US-428: Supplementary guide Brochure How to install Setup guide Setup guide

Contents

Tascam US-428 Owner's Manual Manual pdf 15 page image

153.2.1 WindowsThe US-428 v3 drivers are available onthe CD as executable installers. You’llfind two executable installer files on thedisk, labeled as“US428_Win9x_Install_3_05.exe” (forWindows 98 Second Edition andMillennium Edition) and“US428_Win2k_Install_3_05.exe” (forWindows 2000 and Windows XP).Note that we have also included theindividual driver files as a ZIP file, forusers wishing to install via WindowsHardware Manager. However, werecommend using the installers, as theywill also locate and uninstall any filespertaining to older versions of the US-428 drivers.Also included on the CD are previous(v2.0) drivers for your convenience.To install under Win98SE or ME:Note: The US-428 will run under Win98SE (Second Edition) or ME (MillenniumEdition). Due to its limited USBcapabilities, First Edition Win98 is notrecommended.Note: Run the Installer with US-428turned OFF. Double click on the executable fileUS428_Win9x_Install_3_05.exe.(The blue US-428 icon). Theinstaller will run. Click the "Setup" button. TheWelcome dialog box will appear. Click the "Next" button. The driverfiles will be installed to your harddrive.In some cases, Add Hardware Wizardmay ask for the file "US428WDM.SYS".Should this occur, click Browse anddirect it to the pathWindows/System32/Drivers.In some cases, Add Hardware Wizardmay ask for your Win98 CD-ROM if it isunable to find all the needed systemfiles. We suggest you have it handy. The Setup Complete dialog willappear. Click "Yes, I want to restartmy computer", followed by the Finishbutton. The computer will reboot. Connect the US-428 to thecomputer, plug it in, and turn it on.The Windows plug-n-play will noticea new USB device and start the AddNew Hardware wizard, which willfind the needed files on its own. Thiswill take about 30-60 seconds.The drivers are now installed and theUS-428 is ready to operate.To install under Win2K or WindowsXP:Note: Run the Installer with US-428turned OFF. Double click on the executable fileUS428_Win2k_Install_3_05.exe.(The blue US-428 icon). Theinstaller will run. Click the "Setup" button. TheWelcome dialog box will appear. Click the "Next" button. The driverfiles will be installed to your harddrive.