Tascam US-428 Owner's Manual
Also see for US-428: Supplementary guideBrochureHow to installSetup guideSetup guide
                                                                              | |
Contents
| 
16NOTE: You may be prompted by amessage informing you that thesoftware you are about to install doesnot have a digital certificate. Simplyclick “Continue the installation anyway”and proceed. If you are prompted to restart yourcomputer, do so. Connect the US-428 to thecomputer, plug it in, and turn it on.The Windows plug-n-play will noticea new USB device and start the AddNew Hardware wizard, which willfind the three needed files on itsown. This will take about 30-60seconds.The drivers are now installed and theUS-428 is ready to operate.To install using Windows NewHardware Wizard: Unzip the driver files into a new(empty) folder on the hard disk. Connect the US-428 to thecomputer, plug it in and turn it on The Windows plug-n-play will noticea new USB device and start the AddNew Hardware wizard. Choose "Search for a suitable driverfor my device" and press Next Enter the path where the drivers arestored and press OK After Windows finds the "firmwaredownload" driver, click Next Click "Finish" · The other drivercomponents will be automaticallydiscovered and loaded Click "Finish" if prompted, andreboot if prompted3.2.2 Macintosh Insert the CD-ROM into thecomputer, double-click on the US-428 installer, and follow itsinstructions. Connect the US-428 to thecomputer, and connect power to theunit. When the US-428 is connectedand powered up, the Mac will findthe drivers itself.3.3 Setting Up OMS (MacOSOnly)Cubasis, ProTools and several otherapplications rely on OMS for MIDIimplementation. OMS (Open MusicSystem) is a standard for MIDImanagement on the Macintosh. Sincethe US-428 relies on MIDI controllercommands for its communication withIllustration 3.02 - Windows 98 New Hardware Wizard |
Related manuals for Tascam US-428
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine