T+A HV Series User Manual

Also see for HV Series: User manual User manual User manual User manual User manual

Contents

T+A HV Series User Manual Manual pdf 18 page image

18Basic settings of the SDV 3100 HVSystem Configuration menuIn the System Configuration menu general device settings are adjusted. This menu is described in detail in thefollowing chapter.Calling up and operating themenu To call up the menu, briefly press the -button on the front panel or the-button on the remote control F3100. When you open the menu, the following Select points appear on thescreen:Using the front-panel controls: The SELECT knob is used to select any item within the menu system. To change a selected menu item, press the SELECT knob to confirm yourchoice, then adjust the value by rotating the knob. After making the adjustment, press the SELECT knob again to adopt thenew setting. You can interrupt the process at any time by touching the  button; inthis case any changes you have made are discarded. Holding the SELECT knob pressed in takes you one level further down inthe menu system. Touch the  button again to quit the menu.Using the remote control handset: Use the  /  buttons to select an item in the menu. If you wish to change a selected menu item, first press the-button, and then use the  / -buttons to alter it. After making the change, press the -button again to accept thenew setting. You can press the -button at any time to interrupt the process; thechange is then abandoned. Press the  button again to leave the menu.D/A configurationmenu itemThis item opens the D/A Converter Settings menu. For details, refer tochapter "D/A converter settings of the SDV 3100 HV" (p. 22).