T+A HV Series User Manual

Also see for HV Series: User manual User manual User manual User manual User manual

Contents

T+A HV Series User Manual Manual pdf 59 page image

59The Configuration for a WLAN connectionSetting the parameters for awireless network Check that there is no cable connected to the LAN socket of theSDV 3100 HV. Connect one of the WLAN aerials from the accessories enclosed to theWLAN socket. Switch the SDV 3100 HV on, open the System Configuration menu bypressing the button on the remote control handset or the button on thefront panel of the SDV 3100 HV. Use the  /  buttons on the remote control handset to selectthe menu point “Network”, then confirm your choice with the button. Select under the menu item "Interface" the option "WLAN" The following menu items are displayed for WLAN configuration:PossibleentriesSelecting and connecting a WLAN by handSearching for and Selectingthe Network First select the menu point “Scan for WLAN”, and activate it bypressing the  button. A list of the WLANs found is displayed on the screen. Use the  /  buttons to select the WLAN to which youwish the SDV 3100 HV to be connected, and confirm your choicewith the  button.Entering the Password (forencoded networks)If the network is encoded, the window shown below will appear once theWLAN is selected. At this point please enter the network passphrase and confirm yourinput by pressing . Select the “Store and exit?” point, and confirm your choice with.Storing Network Settingsand RestartingFinally select the “Store and exit?” menu point and press the  button toaccept the settings. If a WEP code is used, the password must be entered as a hexadecimal code(0 - 9, A - F).