T+A HV Series User Manual

Also see for HV Series: User manual User manual User manual User manual User manual

Contents

T+A HV Series User Manual Manual pdf 60 page image

60Connecting to WLAN via the WPS-functionWPS-function The SDV 3100 HV supports WPS for WLAN setup. WPS (Wi-Fi ProtectedSetup) an easy process for establishing a secure WLAN connection. WPS canbe used to connect the SDV 3100 HV with your router in a quick andconvenient way. For that usage most modern routers have implemented theWPS function.Connecting WLANautomatically via the WPSfunction First activate the WPS-function of the Router or Repeater to which youwish the SDV 3100 HV to be connected. For details please refer themanual of the device in question. Start the WPS-Autoconnect function of the SDV 3100 HV within 2minutes. Use the  /  buttons to select the menu point “WPS-Autoconnect”, then confirm your choice with the  button. After the connection is established, the line “Status” shows theconnected WLAN network. Finally select the “Store and exit?” menu point and press the button to accept the settings.Selecting the WLANmanually and conneting viaWPSIf the WPS function connects the SDV 3100 HV to the wrong WLAN, thepreferred WLAN can be also selected manually and only the authenticationcan be done by the WPS function. The procedure is described in thefollowing: First activate the WPS-function of the Router or Repeater to which youwish the SDV 3100 HV to be connected. For details please refer themanual of the device in question. First select the menu point “Scan for WLANs”, and activate it bypressing the  button. A list of the WLANs found is displayed on the screen. Use the  /  buttons to select the WLAN to which you wishthe SDV 3100 HV to be connected, and confirm your choice with the buttonThe window shown below will appear once the WLAN is selected: Select the “Login” menu point and press the  button to activateit. Now select the setting „Auto (WPS)“ and confirm it with the button. Now select the “Store and exit?” menu point and press the button. After the connection is established, the line “Status” shows theconnected WLAN network. Finally select the “Store and exit?” menu point and press the button to accept the settings.