T+A HV Series User Manual

Also see for HV Series: User manual User manual User manual User manual User manual

Contents

T+A HV Series User Manual Manual pdf 20 page image

20Display Modemenu itemThis menu item offers the choice between three different display operationmodes: Always on Temporary Always offSelecting 'Temporary' will switch the display is on for a short while eachtime the SDV 3100 HV is being operated. Shortly after operation the displaywill be switched off again automatically. The brightness of the display can be adjusted separately with the menu item'Display Brightness' (see above).Languagemenu itemIn this menu item you define the language to be used for the displays on thescreen of the front panel of the SDV 3100 HV.The language used for data transferred to the machine, e.g. from an Internetradio station, is determined by the supplying device or the radio station; youcannot define the language on the SDV 3100 HV.Device namemenu itemThis menu point can be used to assign an individual name to theSDV 3100 HV. In a home network the device then appears under this name.If an amplifier is connected via the HLink connection, then the amplifier isable to accept this name automatically, and display it on the screen. The amplifier only accepts this name if an individual name has not alreadybeen assigned at the amplifier itself.Energy Savermenu itemThe SDV 3100 HV features two stand-by modes: ECO Standby with reducedstand-by current drain, and Comfort Standby with additional functions, butslightly higher current drain. You can select your preferred stand-by mode inthis menu point:On (ECO standby):Active functions in ECO standby mode: Power-on at the device itself.Automatic power-down after ninety minutes without signal (only possiblewith certain sources).Off (Comfort standby):The following expanded functions are available: Unit can be switched on using the app. The automatic power-down function is disabled in Comfort standbymode. The picture and sound signals at the HDMI 1 and 2 sources are passedon to the connected TV even if the device is in standby mode.Networkmenu itemAll network settings can be carried out at this menu point. For a detaileddescription on setting up a LAN or WLAN connection please also refer to thesection entitled “Network configuration” on page 51.Music servicesmenu itemAt this point you can enter the access data for the music streaming services(TIDAL etc.) supported by the SDV 3100 HV.Calling up this menu point by pressing the  button displays a list ofthe supported music services.Select the service you wish to use, then confirm your choice with the button.Now use the alpha-numeric keypad of the F3100 to enter the access datawhich you have received from your service provider in the lines “User” and“Passphrase”.