T+A HV Series User Manual

Also see for HV Series: User manual User manual User manual User manual User manual

Contents

T+A HV Series User Manual Manual pdf 55 page image

55Network ConfigurationGeneral Information The SDV 3100 HV can be operated in wired LAN networks (Ethernet LAN orPowerline LAN) or in wireless networks (WLAN).If you wish to use your SDV 3100 HV in your home network, you must firstenter the necessary network settings on the SDV 3100 HV. This includesentering the network parameters such as the IP address etc. both for wiredand wireless operation. If you wish to use a wireless connection, a number ofadditional settings for the WLAN network also have to be entered.Please refer to the Chapter 'Glossary / Additional Information' and 'NetworkTerms' for additional explanations of terminology relating to networktechnology. In the following sections we assume that a working home network (cablenetwork of WLAN network) with router and (DSL) Internet access is present.If you are unclear about some aspect of installing, setting up and configuringyour network, please address your queries to your network administrator or anetwork specialist.Compatible hardware andUPnP serversThe marketplace offers a vast number of routers, NAS devices and USB harddiscs made by a very wide range of manufacturers. equipment is generallycompatible with other makes of machine which bear the UPnP label.Network settings menu All network settings are entered in the Network Configuration menu. Thismenu will vary slightly in appearance depending on the type of your network,i.e. whether you have a wired (LAN) or wireless (WLAN) network.In the network configuration menu under the item 'Interface', first the desiredconnection type must be set.Opening the networksettings menuOpen the System Configuration menu by pressing the  button on theremote control handset or the  button on the front panel of theSDV 3100 HV.Use the  /  buttons to select the “Network” menu item, thenconfirm by pressing the  button.Operating the menu,changing and storingIP addressesUse the  /  buttons in the menu to select the network parameterto be changed, and activate the entry with the  button.You can now change the setting using the following buttons, depending on thetype of setting: /  button for simple selection (ON / OFF)Numeric buttons  to  for entering IP addressesAlpha-numeric input for entering textWhen the setting process is complete, or when you have entered thecomplete address, press the  button to confirm your action.