UBI EasyCoder 101 Technical Manual

Also see for EasyCoder 101: User guide Startup manual Install guide User guide Technical manual

Contents

UBI EasyCoder 101 Technical Manual Manual pdf 17 page image

17UBI EasyCoder 101 – Technical ManualSTARTING UP, cont'd.The type of startup file running in the printer is indicated by themessage shown in the display window directly after power up.A. EasyPak Startup Program (EasyPak 101 & 101 E):LABELSHOP or WINDOWS DRIVER5 sec. 5 sec.4 sec. 4 sec.3 sec. 3 sec.2 sec. 2 sec.1 sec. 1 sec.Refer to the UBI EasyPak 101 Getting Started or UBI EasyPak101 E Getting Started manual for further information.B. UBI Shell Startup Program (EasyCoder 101 & 101 E):PRINT=UBI SHELL or ENTER=UBI SHELL5 sec. v.3.1 5 sec. v.3.14 sec. v.3.1 4 sec. v.3.13 sec. v.3.1 3 sec. v.3.12 sec. v.3.1 2 sec. v.3.11 sec. v.3.1 1 sec. v.3.1Refer to the Startup Manual of UBI Shell Standard or UBI ShellEnhanced respectively for further information. The digits in thelower right corner of the display indicate the version of UBI Shell.C. UBI Stand-Alone Program (EasyPak 101 SA & EasyCoder 101 SA):UBI STAND-ALONEPlease wait 1minRefer to the UBI Stand-Alone Concept, Operating Instructionsmanual for further information.D. No Startup File (non-standard EasyCoder 101 & 101 E):UBI Fingerprint5.1Refer to the documentation of the corresponding version of UBIFingerprint for further information.E. Custom-made Application Program (non-standard EasyCoder 101 & 101 E):Any other display message than those illustrated above indicate thatthe printer is running some custom-made, non-standard applicationprogram or that some error has occurred.Messages at Startup