UBI EasyCoder 101 Technical Manual

Also see for EasyCoder 101: User guide Startup manual Install guide User guide Technical manual

Contents

UBI EasyCoder 101 Technical Manual Manual pdf 51 page image

51UBI EasyCoder 101 – Technical ManualPAPER DIMENSIONS, cont'd.1/. The last third of a label with maxi-mum length cannot be used for print-ing! Also see “Max. printable length”.← a → Web width (incl. backing paper):Maximum .................................................. : 58.0 mm (2.28")Minimum .................................................. : 25.0 mm (0.98")← b → Label width (excl. backing paper):Maximum .................................................. : 56.4 mm (2.22")Minimum .................................................. : 23.4 mm (0.92")← c → Label length:Max. label length (6 dots/mm)1 .................. : 2475 mm (97.4")Max. label length (8 dots/mm)1 .................. : 1875 mm (73.8")Min. label length (all) ................................ : 15.0 mm (0.59")Max. printable length (6 dots/mm) ............. : 1650 mm (65.0")Max. printable length (8 dots/mm) ............. : 1250 mm (49.2")← d → Label gap:Maximum .................................................. : 10.0 mm (0.39")Recommended ........................................... : 1.6 mm (0.06")Minimum .................................................. : 1.2 mm (0.05")The label stop sensor must be able to detect the extreme edges of the labels.Therefore the corner radii must not exceed 2.0 mm (0.08").← e → Backing paper:The backing paper must not extend more than a total of 1.6 mm (0.06")outside the thermal paper. Preferably, the thermal paper should be centredon the backing paper.Self-adhesive LabelsaebcdSELF-ADHESIVELABELSePAPER FEEDDIRECTION