VDO CANcockpit Series Product Manual

2.5.6.3.3 DTC List Display FormatOne Graphic Symbol per DTC Channel (Source Address) can be configured and will be shown together with the DTC in theupper and lower level. It indicates, where the DTC message comes from.Also the number of received DTC`s on this channel (0-40) which are currently inside the DTC Ring Buffer will be displayed.Examples:Electronic Engine Controller (EEC) reports Pre-Filter Oil Pressure(SPN=1208) was 102 times (occurrence count) above normal operatingrange - most severe level (FMI=0).Index 10 provides information about the position inside the Ring Buffer.Electronic Engine Controller (EEC) reports System Diagnostic Code #1(SPN=611), occurrence count information not available (OC=127) andSpecial Instructions (FMI=14).Index 15 provides information about the position inside the Ring Buffer.Electronic Transmission Controller (ETC) reports Clutch Actuator(SPN=788) was 2 times Out of Adjustment ((FMI=7)Index 18 provides information about the position inside the Ring Buffer.Hydraulic Controller reports Hydraulic Reservoir Temperature (SPN=1508)one time Above Normal (FMI=3)Index 40 provides information about the position inside the Ring Buffer.2. Functional SpecificationProduct ManualTechnische Änderungen vorbehalten Technical details subject to change 2 - 24TU00-0726-0000002 0609