Vacon 10 Complete User's Manual
Also see for 10: Quick guideComplete user's manualUser instructionQuick guideQuick guide
                                                                                                      | |
Contents
| 
38 • vacon control panelTel. +358 (0)201 2121 • Fax +358 (0)201 21220577. CONTROL PANEL7.1 GeneralThe panel is an irremovable part of the drive consisting of corresponding controlboard; The overlay with display status on the cover and the button are in clarifica-tions in the user language.The User Panel consists of an alphanumeric LCD display with backlight and a keypadwith the 9 push buttons (see Figure 7.1).7.2 DisplayThe display includes 14-segment and 7-segment blocks, arrowheads and clear textunit symbols. The arrowheads, when visible, indicate some information about thedrive, which is printed in clear text in user language on the overlay (numbers 1…14in the figure below). The arrowheads are grouped in 3 groups with the followingmeanings and English overlay texts (see Figure 7.1):Group 1 - 5; Drive status1= Drive is ready to start (READY)2= Drive is running (RUN)3= Drive has stopped (STOP)4= Alarm condition is active (ALARM)5= Drive has stopped due to a fault (FAULT)Group 6 - 10; Control selectionsWhen API is operated by PC control, there are no arrowhead at I / O, KEYPAD andBUS.6= Motor is rotating forward (FWD)7= Motor is rotating reverse (REV)8= I/O terminal block is the selected control place (I / O)9= Keypad is the selected control place (KEYPAD)10= Fieldbus is the selected control place (BUS)Group 11 - 14; Navigation main menu11= Reference main menu (REF)12= Monitoring main menu (MON)13= Parameter main menu (PAR)14= System main menu (SYS) |
Related manuals for Vacon 10
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine