60 • vacon parametersTel. +358 (0)201 2121 • Fax +358 (0)201 21220588.14 System parametersCode Parameter Min Max Default ID NoteSoftware information (MENU PAR -> V1)V1.1 API SW ID 2314V1.2 API SW version 835V1.3 Power SW ID 2315V1.4 Power SW version 834V1.5 Application ID 837V1.6 Application revision 838V1.7 System load 839When Modbus and no Option board has been installed the comm. Parameters are as followsV2.1 Communication status 808Status of Modbuscommunication.Format: xx.yyywhere xx = 0 - 64(Number of errormessages) yyy = 0 -999 (Number of goodmessages)P2.2 Fieldbus protocol 0 1 0 809 0 = Not used1 = Modbus usedP2.3 Slave address 1 255 1 810P2.4 Baud rate 0 8 5 8110 = 3001 = 6002 = 12003 = 24004 = 48005 = 96006 = 192007 = 384008 = 57800P2.7 Communication time out 0 255 0 8140 = Not used1 = 1 sec2 = 2 secs, etcP2.8 Reset communicationstatus 0 1 0 815Table 8.14: System parameters
