Appendix ï 157Mailbox Command ReferencesWAGO-I/O-SYSTEM 750I/O Modules6.3.5.29 Delete Access Authorization for a Device (UnbindRemoteDevice, 0x86)Access authorization of a remote device is deactivated. When this occurs, theMAC-ID entered in the table space and associated data, such as the "User-FriendlyName" are retained. However no connection to the device is estab-lished and any pre-existing connection is interrupted. If the command is exe-cuted in communication mode, this setting is temporary - at the next restart,the connection is re-established. This offers the possibility of temporarily ex-cluding defective remote devices from the network without changing the con-figuration. If no attempt is made to connect the device after restart, the com-mand must be called up in the configuration mode.ConditionsMailbox size Operating mode/profile Device role6 12 18 Config. Real-time Ad hoc Master SlaveSaveconfig. Restart● ● ● ● ● ● ● ● - * -* Setting is temporary in communication mode. In configuration mode,the setting is saved, comparable to other settings, during a warm start.RequestByte 27 26 25 24 23 22 21 200 MBX_UNBINDREMOTEDEVICE1 T -2 MBX_TABLE_TABLE_AND_INDEXArgumentsParameter Value DescriptionBit 0Ö3 Table IndexIndex 0...6 for WAGO devices of slots 1...7Index 0...5 for external devices of slots 8...12MBX_TARGET_TABLE_AND_INDEXBit 4Ö7 Target table"2" for WAGO_DEVICE (slots 1...7)"1" for EXTERNAL_DEVICE (slots 8...12)ResponseByte 27 26 25 24 23 22 21 200 MBX_UNBINDREMOTEDEVICE1 T MBX_RESULT
