Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Important Comments
- Symbols
- Safety Notes
- I/O Modules
- Indicators
- Schematic Diagram
- Function Description
- Operating Modes
- Process Image
- Piconet
- Tools for Configuring and Operating
- WAGO-I/O-SYSTEM
- Title Bar
- Navigation
- Mode Assignment
- Parameterization Area
- Status Display
- Module 750-644
- Role Assignment (Master/Slave)
- Devices from Network Search
- Assigning Slave Process Data to Slots in the Master
- CANopen
- Example
- DeviceNet
- ETHERNET
- EtherNet/IP Protocol
- PROFIBUS-DP
- Mailbox Commands
- Overview Sorted According to Mailbox Commands
- Return Values of Mailbox Commands
- Mailbox Command References
- General Commands
- Block Transfer
- Continuation of a Block Download or Upload (DLD_CONT 0x02)
- End a Block Download or Upload (DLD_END, 0x03)
- Maintenance and Firmware
- Read Host Firmware Version (GetHostFwVersion, 0x12)
- Query the Remote Process Image Parameters within the Master Process Image (GetRemotePiMapping, 0x33)
- Device Configuration
- Write the Local Device Name (SetLocalDeviceName, 0x41)
- Read Local MAC ID (GetLocalMacID, 0x42)
- Read Local IP Address (GetLocalIPAddress, 0x43)
- Read Local Subnet Mask (GetLocalSubnetMask, 0x45)
- Set Local Subnet Mask (SetLocalSubnetMask, 0x46)
- Read Local Operation Mode (GetLocalOperationMode, 0x49)
- Set Local Operation Mode (SetLocalOperationMode, 0x4A)
- 6.3.5.12 Read Local Encryption Mode (GetLocalEncryptionMode, 0x4D
- Set Local Encryption Mode (SetLocalEncryptionMode, 0x4E)
- Read Local Authentication Mode (GetLocalAuthenticationMode 0x4F)
- Set Local Authentication Mode (SetLocalAuthenticationMode 0x50)
- Delete Locally Saved Authorization (EraseLocalAuthentication 0x53)
- Read Role of the Local Device (GetLocalDeviceRole, 0x55)
- Set Role of the Local Device (SetLocalDeviceRole, 0x56)
- Restore Factory Settings (SetFactorySettings, 0x57)
- Grant Access Authorization for a Device (BindRemoteDevice 0x85)
- Delete Access Authorization for a Device (UnbindRemoteDevice 0x86)
- Read Back the QoS Settings (GetConnectionQoS, 0x88)
- Set the QoS Settings (SetConnectionQoS, 0x89)
- Read Back Time Settings - Between Two Attempts to Establish a Connection (GetReconnectionTimePeriod, 0x8A)
- Set Time Settings - Between Two Attempts to Establish a Connection (SetReconnectionTimePeriod, 0x8B)
- Diagnostics
- 6.3.6.2 Read Status of the Wireless Network (GetNetworkStatus, 0xD1
- Read Diagnostic Information (GetStatusMessage, 0xD2)
- Read Connection Quality (GetLinkQuality, 0xD5)
- Read Signal Strength for a Connection (GetLinkSignalStrength 0xD7)
- Read Available Hopping Channels (GetAvailableChannelMap 0xD8)
- Set an LED (SetLED, 0xD9)
- Mirror Mailbox for Test Purposes (MirrorMailboxCommand 0xDA)
- 6.3.6.9 Read the Operating Time of the Module (GetLocalUpTime
- Extended Register Structure (Configuration Block)
- Example Configurations using WAGO-I/O-CHECK
- Testing the Process Data Exchange
- Startup using Mailbox Commands in the Process Data Dialog
- Glossary
|
62 ï Tools for Configuring and OperatingConfiguring and Operating with WAGO-I/O-CHECKWAGO-I/O-SYSTEM 750I/O Modules4.1.1.1 Title BarThe position of the module within the node (as well as its name and item andversion number) are displayed in the title bar of the parameterization dialog.4.1.1.2 Symbol BarThe symbol bar in the BluetoothÆ parameterization dialog contains the follow-ing buttons (see Figure 21):Figure 21: Buttons in the Bluetooth Æ parameterization dialog g064420eTable 24: Buttons in the Bluetooth Æ parameterization dialog g064421e-30eButton Description[Close]Closes the active window. If you have changed settings, you will be asked toaccept the values in the I/O module.[Open]Opens window to select a parameter file. Device settings are read from the pa-rameter file and transferred to the connected I/O module.[Save]Opens a window to select a parameter file. The device settings are saved in theparameter file.[Read]Reads the current settings from the connected I/O module and displays them inthis window.[Write]Transfers the settings displayed in this window to the connected I/O module.[Default]Overwrites the locally saved configuration with the factory settings.[Restart]Restarts the host controller.Attention: All wireless connections are broken off.[Flash]Writes the current configuration of the host controller to the flash memory andrestarts it. Attention: All wireless connections are broken off.[Data Frame]Sets process size and mailbox size.[Help]Displays help for this window.
|
