3131IndexContentsIndexContentsCUSTOMIZING TOOL BUTTONSSelect the P EN tab to change the functions assigned to the side switch and tip of your Intuos3 pen.Each tool button can be set to simulate a variety of mouse functions; the pull-down menus enable you tochoose the function that will be performed.Select the function to performwhen pressing the upper or lowerside switch.When you bring the pen tip within6 mm (0.25 inch) of the tabletsurface without touching the tabletand press the upper or lower sideswitch, the selected functionoccurs.Hint: To make double-clickingeasier, set the side switch todouble-click automatically byselecting DOUBLE CLICK .Double-click here to change thefunction assigned to the pen tip.• At least one tool buttonshould be set to the CLICKfunction.• The tip must be set to CLICKin order to draw in mostgraphics applications.Returns the tab settings to theirfactory default conditions.Note: For the precise placement ofright- and middle-clicks, you canenable the SIDE SWITCH EXPERTMODE. Select the OPTIONS...button at the bottom of the controlpanel to display the OPTIONSdialog box. (SIDE SWITCH EXPERTMODE is the default setting onTablet PCs.)