7373IndexContentsIndexContentsCHANGING THE TABLET MODEWithin the control panel’s T ABLET list, double-click on the tablet icon to display the T ABLET MODE dialog box.The TABLET MODE setting applies to all tools and applications.INSTALLING MULTIPLE TABLETSThe TABLET list displays an icon for any supported tablet that has been detected on your system, and allowsyou to select the tablet for which your changes will apply.To add a new tablet, connect it to your computer.• For USB tablets, the system searches the USB ports. When the new tablet is found, it is automaticallyinitialized.• If multiple tablets are installed, the tablet used to open the Wacom Tablet control panel is selected as thedefault tablet.To remove one of multiple tablets from the driver, in the Wacom Tablet control panel select the tablet tobe deleted and click on the [ – ] button next to the T ABLET list. Note that you will need to restart yourcomputer before you can re-add the tablet to the driver.Recommended forgraphics applications.This is the defaultcondition.Maximum data rate.Required by somehandwriting recognitionsoftware.Select a tablet icon for which tocustomize tool and applicationsettings.
