7474IndexContentsIndexContentsINTUOS3 LENS CURSORAvailable for use with 12x12 / A4 Oversize and 12x19 / A3 Wide tablet models, the lens cursor is an idealtool for entering precise coordinate position information into your computer. The lens cursor reports theposition of the cross-hair to the computer. This makes the lens cursor especially useful for digitizingdrawings into graphics and CAD applications.The left button is set toCLICK by default, and isthe primary button usedfor selecting.The middle button isset to MIDDLE CLICKby default.The right button is set to RIGHT CLICK by default, anddisplays a context menu when pressed.Rotate lens for best viewing angle.The left and right side rear buttons are set for BACK andFORWARD functionality within your Internet browser.Working with application-specific settingsLens cursor equipped with programmable buttons.The default setting for the Intuos3 lens cursor is MOUSE mode, enabling youto move the screen cursor with a “pick up and slide” action similar to using atraditional mouse. When using the lens cursor to digitize a drawing, the lenscursor must be set to PEN mode.Important: When the lens cursor is not in use, place it on yourdesk. Leaving an Intuos3 tool on the tablet may interfere withscreen cursor positioning when using other pointing devices.For order information on this and other available Intuos3 tools, see orderingparts and accessories.Mouse mode settings