6161IndexContentsIndexContentsTESTING THE EXPRESSKEYS1. With the D IAGNOSTICS dialog box open, observe the TABLET INFO column as you test the ExpressKeys.If you have more than one tablet connected to your system, be sure to select the tablet in the T ABLETINFO column.2. Test the keys on your tablet by clicking them one at a time. Each time you press a key, its number will bedisplayed next to either the L EFT KEYS or R IGHT KEYS category, depending on which keys group you aretesting.When you are done, click on the C LOSE button to exit the dialog box.TESTING THE TABLET TOUCH STRIPS1. With the D IAGNOSTICS dialog box open, observe the T ABLET INFO column as you test the tablet TouchStrip(s). If you have more than one tablet connected to your system, be sure to select the tablet in theTABLET INFO column.2. First, slide your finger up or down along the entire length of the Touch Strip you want to test. As youtouch and move your finger along the Touch Strip, a number will indicate the current finger position forthe respective Touch Strip next to L EFT TOUCH STRIP or RIGHT TOUCH STRIP.3. Next, slide the pen tip up or down along the Touch Strip edge closest to the tablet’s active area. As youmove the tool tip along this area of operability, a number will indicate the current pen position for therespective Touch Strip next to L EFT TOUCH STRIP or R IGHT TOUCH STRIP.4. When you are done, click on the C LOSE button to exit the dialog box.
