5353IndexContentsIndexContentsWORKING WITH DISPLAY TOGGLED ISPLAY TOGGLE is available only on multiple monitor systems. This feature allows you to work with yourtablet on either all displays or on one display at a time, thus providing more control for your work. Aftersetting one of the ExpressKeys to D ISPLAY TOGGLE, you can then press that button to toggle the currenttablet mapping between a base mapping (the current setting from the M APPING tab) and each of themonitors sequentially.In the Wacom Tablet control panel, the D ISPLAY TOGGLE tab is automatically available when the Intuos3tablet is installed on a multi-monitor system. This tab lets you set which display will be included in the togglesequence.Note: If more than one ExpressKey is set to DISPLAY TOGGLE, they will each function identically based onyour control panel settings for the D ISPLAY TOGGLE function.All monitors are selected by default.Uncheck any monitor you wantremoved from the toggle sequence.• When the base mapping isactive, your tablet and displaymappings follow the MAPPINGtab settings for all devices andapplications.• As you toggle to the nextdisplay, each tool’s active tabletarea is mapped to that display(in PEN mode).• Your settings on the MAPPINGtab for ORIENTATION, FORCEP ROPORTIONS, and TABLET AREAare maintained for all devicesand applications.• Toggling one more time after thelast checked display returns thesystem to the base mappingsset in the MAPPING tab.Note that any of the following actions will return the toggle sequence to thebase mapping:• Launching a graphics application that supports pressure sensitivity.• Logging out of or rebooting the system.• Switching users (Fast User Switching).• Hot-plugging the tablet.• Placing the system in sleep mode.• Changing the MAPPING or DISPLAY TOGGLE tab settings.• Changing the resolution or number of displays on your system.• Using the MODE TOGGLE... function.• Selecting PEN MODE or MOUSE MODE from the Pop-up Menu.Tip: To toggle between monitorswithout including the ‘full display’option, disable the first display on theDISPLAY TOGGLE tab. Then go to theMAPPING tab and set the currentSCREEN AREA to the first display.