Configuration 4-9The following chart lists features that can be configured from the Print dialog box.Accurate Screens Negative PrintEnhanced Screens ResolutionFast Imaging Smooth ShadingGamma Tray Switch §Mirror Print§ PC Menu onlySome applications require additional configuration to access certain features. See yourapplication documentation.Configuring Printer FeaturesPrinter interface and features are set using front panel keys and menus, PPD optionsin your application Print dialog box, and XANTÉ utilities via your browser. Thissection describes available printer features and their configuration.Accurate Calibration Technology (X-ACT)X-ACT (XANTÉ’s patented Accurate Calibration Technology) allows you to calibrateyour printer line lengths as well as correct inaccuracies in printing width, height, skew,and angle. X-ACT is part of your printer’s Graphic Software package.You can use the front pane Graphic: Xact menu or the browser More X-ACT feature.This section cover front panel calibration; see “PostScript Features (AccelaFont, DPI,Linearization, LPI, Margins, More X-ACT, and VM)” in chapter 2 (Macintosh) or 3(PC) for details on the browser procedure.Because of manufacturing variations and usage, a printer may not print lines with theexact dimensions specified by the application. X-ACT allows you to calibrate yourprinter to compensate for these differences.Front Panel X-ACTYour printer’s front panel Graphic: Xact menu allows you to make 1/2 mm line lengthadjustments using the following procedure.To use the front panel XACT, you need a metric ruler with 1/2 millimeter rulemarkings. Also, you must use the paper cassette, not the multipurpose feeder, whenmaking X-ACT adjustments. The adjustments for one size media apply to every mediasize, so you do not have to make individual adjustments for each size.
