4-22 ConfigurationAccurate Screens is active in the PPD only if the Enhanced Screens menu is set toNormal.Start-up PageThe Start-up Page feature prints a page that lists the selected resolution, installedRAM, hard disk identities, page count, enabled interfaces, and network information(if the Ethernet upgrade is installed) each time the printer is turned on.Set Start-up Page from the Utility: Start Page configuration menu, from the browserInformational Pages, or by downloading Adobe PostScript files to the printer.In the front panel Utility: Start Page menu, On (the factory default) enables thefeature and Off disables it. In the browser utilities, Informational Pages allows you toturn the Start-up Page feature on or off and Utilities Pages allow you to print this pageon demand.XANTÉ Utilities CD-ROM contains the PostScript files Startpg.on and Startpg.off.Download these files to the printer to enable (Startpgon.ps) or disable (Startpgoff.ps)the feature. See “PS Files Folder” and “Using Adobe Downloader” in chapter 2(Macintosh) and “PS_Files Folder” in chapter 3 (PC) for instructions.To print a start-up page manually, take the printer off line and press the Test key. Afterthe page prints, press the Online key to put the printer back on line.Toner Cartridge ControlIf your printer does not produce the rich, black images that you expect, tryredistributing the toner in the cartridge and adjusting the print density beforereplacing the toner cartridge.Redistributing TonerIf you have not used the toner cartridge in several days, toner may have settled.Remove the cartridge from the printer, and shake the cartridge gently to redistributetoner. Replace the cartridge in the printer. See “Toner Cartridge” in chapter 1.Adjusting Print DensityYou can increase or decrease the amount of toner laid down by the printer using theprint density dial.The amount of toner used increases as printer dial settings move from low (L) to high(H). Printing with too high a setting shortens the life of the toner cartridge and maydegrade print quality.
