Introduction and Installation 1-134. Align the paper stack and load it into the cassette print side up, leading edge tothe back. See “Media Sources” in chapter 5 to determine whether to load mediashort or long edge first (fig. 1.21).5. Adjust media guides to the size of the paper stack.To prevent paper jams, make sure the paper fits between the paper guides and underthe cassette’s retaining clips (fig. 1.21).6. Replace the cassette cover. Then, slide the cassette into the printer until it snapsinto place.You will feel a slight resistance as you push the cassette into the printer; this is causedby the catch that prevents the cassette from being dropped.7. Pull out the output tray extension and turn up the paper stop for paper sizeslarger than letter/A4 (fig. 1.22).Fig. 1.22 Adjust Output Tray ExtensionMultipurpose FeederThe printer’s multipurpose feeder feeds up to 150 sheets of 20 lb bond/60 lb textweight (65 g/m2 ) paper or media such as labels and transparencies to a stack height ofabout .70" (18 mm).The multipurpose feeder supports non-standard size media, including envelopes,from 3.94" x 5.83" (100 mm x 148 mm) to 13.00" x 35.50" (330 mm x 902 mm). Thisfeeder can handle media weights from 16 - 36 lb (60 - 155 g/m2).Make sure all media used meets the guidelines in “Media Specifications” in chapter 5.
