Troubleshooting 8-1Chapter 8 - TroubleshootingIntroductionThis chapter describes the status messages that can direct you to the source of aproblem, suggests solutions for some typical printer setup and print quality problems,and provides information about preventing and clearing media jams.Status MessagesPrinter front panel window messages provide printer status information and can helpyou determine the source of a problem or media jam.EARLY PAPER JAM A media jam has occurred along the paper path caused bymedia reaching a position earlier than expected.E:FIFO The FIFO SIMM or SODIMM is not present, is notproperly inserted, or is broken.E:FIXING ROLLER There is a hardware problem with the fuser.E:FUSER There is an error with the fuser, such as a temperatureinaccuracy.E:LASER There is a hardware problem with the laser.E:MOTOR There is a hardware problem with the motor.EXIT PAPER JAM A media jam has occurred after the media has been printedbut before it has been deposited in the output tray.FilmMaker 4 Appears when the printer is first turned on, before theinitialization process begins.FRONT COVER OPEN The multipurpose feeder cover is open.FRONT PAPER JAM A media jam has occurred caused by the media not beingpulled from the tray properly.FULL STACK The output tray is full.FUSER COVER OPEN The fuser cover is not closed properly.
