2-4 Macintosh SetupbbMacintosh OS X Printer InstallationThis section describes how to install your printer on your Macintosh OS X system.You must have Mac OS X version 10.1.5 or 10.2.1 to install your printer properly.1. Verify that AppleTalk is enabled.a. Select Apple menu: System Preferences: Network. The Network windowappears (fig. 2.4).b. Select Built-in Ethernet from the drop-down Show menu (fig. 2.4). Next,select the AppleTalk tab, select Make AppleTalk Active, and click ApplyNow. Then, close the window.Fig. 2.4 Network Window Fig. 2.5 Utilities Installation Window2. Insert the XANTÉ Utilities CD-ROM into your Macintosh. Double-click theOSX_setup icon. The Utilities Installation window appears (fig. 2.5).3. Select your printer from the Install Printer drop-down menu (fig. 2.5). PrintCenter will open automatically. If you have OS X version 10.1.5, go to step 4;for OS X version 10.2.1, skip to step 5.4. Do the following if you are using OS X version 10.1.5.Some features may appear in the Print window that do not apply to your printer. Forexample, you may see 2400 x 2400 DPI resolution even when your printer does nothave this option installed. In such cases, disregard these listings.a. Click Add in the window asking if you would like to add to your list ofprinters now (fig. 2.6), or if you already have printers installed, click AddPrinter. The Printer List window appears (fig. 2.7).
