4-2 Phaser 4400 Laser Printer Service ManualTest PrintThis page of blocks, lines, patterns, and text provides an aid in evaluating the qualityof printing and in making registration adjustments. The use of the Test Print inevaluating image quality is covered in detail in Image-Quality Checkout Procedureson page 3-41.Note: Insure that Edge-to-edge printing is set to OFF in the PCLJob Defaults Menu before starting the Test Print. Otherwise,the image will be shifted left.The printer prints the Test Print in accordance with the defaults established in theJob Defaults Menu. To set the Job Defaults:1. Select the Printer Setup Menu and press OK.2. Select the Job Defaults Menu and press OK.3. Select the print parameter that you want to set or change and press OK.In most cases, you are prompted to choose from several alternatives, such aschoosing the input tray. In other cases, Job Offset for instance (if optionalStacker is installed), pressing OK toggles the setting from its current state, eitherfrom Off to On, or from On to Off. When you set the quantity, it is for a number ofimage pairs. When Duplexing is off, selecting a quantity of 5 prints tensingle-sided prints. When duplexing is on, selecting a quantity of 5 prints fivedouble-sided prints.4. When you have finished setting all the parameters, scroll to Exit and press OK toreturn the printer to the Ready state.To print the Test Print:1. Select Printable Pages Menu from the Main Menu and press OK.2. Select Print Test Prints and press OK. The printer automatically printstwo images.Note: If you changed the print quantity, be sure to set it back to 1
