9-4 Phaser 4400 Laser Printer Service ManualBase Engine Wiring DataBase Engine P/J TableConnector Coordinate DescriptionTR E19 (Map 1) Connects the Transfer Roller to the HVPS.DTS G28 (Map 1) Connects the Detack Saw to the HVPS.P/J231 C16 (Map 1) Connects the Engine Logic Board to the Connector PWB.P/J41 B17 (Map 1) Connects the Connector PWB to the Env PWB throughP/J418.P/J42 A19 (Map 1) Connects the Toner Sensor to the Connector PWBP/J43 A18 (Map 1) Connects the Register Sensor and Register Clutch to theConnector PWB.P/J44 A17 (Map 1) Connects the Pick Up Solenoid to the Connector PWB.P/J45 A16 (Map 1) Connects the MPT No Paper Sensor to the Connector PWB.P/J51 J19 (Map 1) Connects the Engine Logic Board to the 550-Sheet FeederPWB.P/J61 G18 (Map 1) Connects the Feeder PWB to the Tray 1 Size PWB.P/J64 A28 (Map 1) Connects the Turn Clutch Assembly to the Feeder PWB.P/J65 B29 (Map 1) Connects the Feed Clutch Assembly to the Feeder PWB.P/J66 C28 (Map 1) Connects the Low Paper Sensor to the Feeder PWB.P/J67 A27 (Map 1) Connects the Paper Lift Motor to the Feeder PWB.P/J261 K24 (Map 1) Connects the HVPS to the Engine Logic Board.PRB K25 (Map 1) Connects the Fuser to the HVPS.P/J331 J16 (Map 1) Connects the Size PWB to the Engine Logic Board.P/J641 A24 (Map 1) Connects the Turn Clutch to the Feeder PWB.P/J651 A25 (Map 1) Connects the Feed Clutch to the Feeder PWB.P/J661 H28 (Map 1) Connects the Low Paper Sensor to the Feeder PWB.P/J662 F29 (Map 1) Connects the Stack Height Sensor to the Feeder PWB.P/J671 D19 (Map 1) Connects the Motor Harness Assembly to the Socket.P/J672 C20 (Map 1) Connects the Cassette Assembly to the Feeder Assembly.P/J673 C20 (Map 1) Connects the Motor Assembly to the Connector.P/J11 K43 (Map 2) Connects the Fuser Assembly to the LVPS.P/J21 H31 (Map 2) Connects the Laser Assembly to the Engine Logic Board.P/J22 G34 (Map 2) Connects the Connects the Laser Assembly to the EngineLogic Board.P/J23 K32 (Map 2) Connects the Connector PWB to the Engine Logic Board.P/J25 I31 (Map 2) Connects the Print Cartridge Sensor to the Engine LogicBoard.P/J26 H35 (Map 2) Connects the HVPS to the Engine Logic Board.P/J27 I35 (Map 2) Connects the Fuser Exit Sensor and Thermistor to theEngine Logic Board.P/J28 K35 (Map 2) Connects the LVPS to the Engine Logic Board.P/J29 K33 (Map 2) Connects the Main Motor to the Engine Logic Board.P/J30 K35 (Map 2) Connects the Rear Interlock Switch to the Engine LogicBoard.P/J31 G31 (Map 2) Connects the Stack Full Sensor to the Engine Logic Board.